Materials
We machine 44 grades in stock, with 50+ available on request. Raw material certificates available on request.
| Category | Available Materials |
|---|---|
| Aluminum | 6061-T6, 7075-T6, 5052, 6082 |
| Stainless Steel | 303, 304, 316L, 17-4PH |
| Carbon Steel | 1045, 4140, 4340, A2/D2 tool steel |
| Titanium | Ti-6Al-4V (TC4), Grade 2 |
| Copper & Brass | C36000 brass, C11000 copper, bronze |
| Plastics | ABS, POM (Delrin), PEEK, PTFE, Nylon 66, PC, PMMA |
Engineering Materials We Stock
Bars, plates, tubes and billets — sourced from certified mills with full traceability.
Standard Stocked Materials
Aluminum
6061-T6, 7075-T6, 2024, 5052, MIC6
6061-T6, 7075-T6, 2024, 5052, MIC6
Stainless Steel
304, 316/316L, 303, 17-4 PH, 2205 duplex
304, 316/316L, 303, 17-4 PH, 2205 duplex
Steel & Alloy
1018, 1045, A36, A572, 4140, 4340
1018, 1045, A36, A572, 4140, 4340
Brass & Copper
C360 brass, C110 copper, C932 bearing bronze
C360 brass, C110 copper, C932 bearing bronze
Titanium
Grade 2, Grade 5 (Ti-6Al-4V)
Grade 2, Grade 5 (Ti-6Al-4V)
Plastics
PEEK, Delrin/POM, PTFE, Nylon, HDPE, polycarbonate
PEEK, Delrin/POM, PTFE, Nylon, HDPE, polycarbonate
Don’t see your material? Request a quote — we stock many specialty alloys and can source custom grades with mill certificates.
Browse Materials
- Metal Grade Cross Reference: AISI, EN, DIN, JIS and GB
- 1045 Carbon Steel CNC Machining: Shafts and Gears
- 1144 Stressproof Steel CNC Machining: No Heat Treat Needed
- 17-4 PH Stainless Steel CNC Machining After H900 Aging
- 2017 Aluminum CNC Machining: High-Strength Rivet Alloy
- 2024 Aluminum CNC Machining: High-Strength Alloy Guide
- 3003 Aluminum CNC Machining: Formable, Weldable Parts
- 303 Stainless Steel CNC Machining: Free-Machining Grade
- 304 Stainless Steel CNC Machining: Cost and Tolerances
- 316L Stainless Steel CNC Machining for Marine and Medical
- 4140 Alloy Steel CNC Machining: Pre-Hard and Q&T
- 420 Stainless Steel CNC Machining: Hardened Parts
- 440C Stainless CNC Machining for Bearings and Valves
- 5052 Aluminum CNC Machining for Sheet and Enclosure Parts
- 6061 Aluminum CNC Machining: Specs, Tolerances, Cost
- 6082 Aluminum CNC Machining (EU Equivalent of 6061)
- 7050 Aluminum CNC Machining for Thick Airframe Blocks
- 7075 Aluminum CNC Machining: Aerospace-Grade Parts
- 932 Bearing Bronze CNC Machining
- A2 Tool Steel CNC Machining for Blanking Dies
- ABS CNC Machining for Prototypes and Enclosures
- Acetal Copolymer (POM-C) CNC Machining Guide
- Beryllium Copper CNC Machining: Safety and Tolerances
- C110 Copper CNC Machining for Busbars and Heat Sinks
- C360 Brass CNC Machining: Free-Cutting Brass Parts
- D2 Tool Steel CNC Machining for Dies and Punches
- Hastelloy C-276 CNC Machining: Chloride Service
- Inconel 718 CNC Machining: Cost, Tooling, Lead Time
- Invar 36 CNC Machining for Optical and Metrology Parts
- M2 High-Speed Steel CNC Machining
- Magnesium AZ31 CNC Machining: Lightweight Components
- MIC-6 Cast Aluminum Tooling Plate Machining
- Monel 400 CNC Machining for Seawater Hardware
- Nylon (PA6 / PA66) CNC Machining Guide
- PEEK CNC Machining for Semiconductor and Medical Parts
- PMMA Acrylic CNC Machining: Clear Optical Parts
- Polycarbonate (PC) CNC Machining: Clear and Tough Parts
- POM / Delrin CNC Machining: Plastic Gear and Bushing Parts
- PPS CNC Machining for High-Temperature Parts
- PTFE CNC Machining: Chemical-Resistant Components
- Titanium Grade 2 CNC Machining for Chemical Equipment
- Titanium Grade 5 (Ti-6Al-4V) CNC Machining Guide
- Titanium Grade 7 CNC Machining for Corrosive Service
- UHMW-PE CNC Machining for Wear Parts
- ULTEM (PEI) CNC Machining for Aerospace and Medical